# ConTesA Conformance Report

Generation Date: Thu Feb 06 15:04:23 EST 2014
Validation Object: EntityMergeResultMessageExtensions.xsd
Skip to: Rule Contexts Summary | Schema Summary | Rule Results | Auto Fail Rules | Manual Fail Rules | All Rules
Rule Summary
Statistical information about all passing/failing rules in the system.
Auto Pass - 115 (62%)
There were 115 rules that automatically passed validation. The "Auto Pass" category describes rules that are automatically executed by ConTesA, and result in a "Success" or "Information" status.
Auto Fail - 0 (0%)
There were 0 rules that failed validation. The "Auto Fail" category describes rules that are automatically executed by ConTesA, and result in a "Warning", "Failure", or "Error" status. Each rule may have failed one or more times. See the "Auto Fail Rules" section for specific locations of the failures in your schema file(s). This category may also contain "Partial" rules. Partial rules are rules that cannot be fully automated by ConTesA and require the user to verify their status. Partial rules are placed into the "Auto Fail" category if their automated checks result in a status of "Warning", "Failure", or "Error".
Manual Pass - 0 (0%)
There were 0 rules that were manually verified by the user. The "manual" category describes rules that must be checked by the user because they are either not yet implemented, cannot be automated, or are only partially implemented in ConTesA. "Partial" rules are in the manual category, because the user must verify the portions of the rule ConTesA cannot automate. A rule is considered to be in the "Manual Pass" category if a user has verified that the manual rule will result in a "Success" status.
Manual Fail - 68 (37%)
There were 68 rules that were not automatically checked by ConTesA, and require manual verification by the user. The "manual" category describes rules that must be checked by the user because they are either not yet implemented, cannot be automated, or are only partially implemented in ConTesA. "Partial" rules are in the manual category, because the user must verify the portions of the rule ConTesA cannot automate. Partial rules are placed in the manual fail category only if their partial rule implementation results in "Success" or "Information", otherwise they are placed in the auto fail category. They are placed in the manual fail category because they cannot be verified as being successful until they have been checked by the user.
Rule Contexts Summary
A statistical analysis of business rules, based on which context they belong in.

Context Name | Description | Auto Pass | Auto Fail | Manual Pass | Manual Fail | Total
--- | --- | --- | --- | --- | --- | ---
NIEM 2.1 Rules | Conformance testing for NIEM 2.1, based on the NDR 1.3 rules. | 115 | 0 | 0 | 68 | 183
Totals | 115 | 0 | 0 | 68 | 183

Schema Summary
A summary of the 1 XML Schema files found, and how ConTesA classified them.

Schema File | Nature | Purpose | Method
--- | --- | --- | ---
/var/cache/tomcat6/temp/ConTesA_3_0-20140206_034707/org.gtri.contesa.util.io.TempFileManager$createTempDirectory.call_-1/uploads-83609188872695681320140206150203/080BC169485FE29A123240F0F5E42268/EntityMergeResultMessageExtensions.xsd | xsd | schema | guess

Auto Fail Rules (0)
Provides a detailed look at the status of each rule that has auto-failed. The "status" of a rule is defined to be the worst status out of the collection of results.

Status | Results | Name | Description
--- | --- | --- | ---
There are no auto-failed rules.

Manual Fail Rules (68)
Provides a detailed look at the status of each rule that has manually-failed. The "status" of a rule is defined to be the worst status out of the collection of results.

Status | Results | Name | Description
--- | --- | --- | ---
Manual Fail | 0 | NIEM-2.1_5-04_REF_EXT: | Within a NIEM-conformant schema, the data definition provided for each documented component SHALL follow the requirements and recommendations for data definitions given by [ISO 11179 Part 4].
Manual Fail | 0 | NIEM-2.1_5-05_REF_SUB_EXT: | A NIEM component name SHALL be formed by applying the informative guidelines and examples detailed in Annex A of [ISO 11179 Part 5], with exceptions as specified in this document, most notably those specified in Section 9, Naming Rules.
Manual Fail | 0 | NIEM-2.1_6-08_REF_SUB_EXT: No unconstrained type substition - anySimpleType. | The schema SHALL NOT reference the type xsd:anySimpleType.
Manual Fail | 0 | NIEM-2.1_6-22_EXT: No recursively defined model groups - xsd:choice. | The use of xsd:choice SHALL define syntax, structure, grouping, and cardinality of instances, but SHALL NOT define semantics. The semantics of a property within an xsd:choice SHALL be identical to the semantics of the property within an xsd:sequence.
Manual Fail | 0 | NIEM-2.1_6-45_REF_SUB_EXT: | Within the schema, when a namespace other than the XML namespace or the XML Schema namespace is used, its content MUST be valid with respect to the schema imported for that namespace.
Manual Fail | 0 | NIEM-2.1_6-47_REF_EXT: Human-Readable Documentation | Within the schema, the content of the xsd:documentation element that constitutes the data definition of a component MUST be character information items as specified by [XMLInfoSet].
Manual Fail | 0 | NIEM-2.1_6-48_REF_SUB_EXT: | XML comments SHALL not be used for persistent information about constructs within the schema.
Manual Fail | 0 | NIEM-2.1_6-49_REF_EXT: xsd:appinfo child element must be EII or CII. | Within the schema, any immediate child of an xsd:appinfo element SHALL be an element information item or a comment information item.
Manual Fail | 0 | NIEM-2.1_6-54_REF_SUB_EXT: simpleType xsd:extension. | Within the schema, given an element xsd:simpleContent with a child xsd:extension owning an attribute base, if the attribute base has a value that resolves to the name of a simple type, then the element xsd:extension MUST have an immediate child element xsd:attributeGroup.
Manual Fail | 0 | NIEM-2.1_7-02_REF_SUB_EXT_CON: | Two XML Schema documents SHALL have the same value for attribute targetNamespace carried by the element xsd:schema, if and only if they represent the same set of components.
Manual Fail | 0 | NIEM-2.1_7-03_REF_SUB_EXT_CON: | Two XML Schema documents SHALL have the same value for attribute targetNamespace carried by the element xsd:schema, and different values for attribute version carried by the element xsd:schema if and only if they are different views of the same set of components.
Manual Fail | 0 | NIEM-2.1_7-10_REF_EXT: data element definition. | Words or synonyms for the words within a data element definition SHALL NOT be reused as terms in the corresponding component name if those words dilute the semantics and understanding of, or impart ambiguity to, the entity or concept that the component represents.
Manual Fail | 0 | NIEM-2.1_7-11_REF_EXT: object semantic meaning. | An object class SHALL have one and only one associated semantic meaning (i.e., a single word sense) as described in the definition of the component that represents that object class.
Manual Fail | 0 | NIEM-2.1_7-12_REF_EXT: object definition. | An object class SHALL NOT be redefined within the definitions of the components that represent properties or subparts of that entity or class.
Manual Fail | 0 | NIEM-2.1_7-13_REF_EXT: data definition. | A data definition SHALL NOT contain explicit representational or data typing information such as number characters, type of characters, etc., unless the very nature of the component can be described only by such information.
Manual Fail | 0 | NIEM-2.1_7-14_REF_EXT: Standard Opening Phrases | A component definition SHALL begin with a standard opening phrase that depends on the class of the component per Table 7-2: Standard Opening Phrases.
Manual Fail | 0 | NIEM-2.1_7-16_REF_EXT: deprecated components. | A component that is deprecated SHALL be indicated as such by the component having application information appinfo:Deprecated, with an attribute value with a value of true.
Manual Fail | 0 | NIEM-2.1_7-30_REF_EXT: appinfo:ReferenceTarget must contain a valid type. | Within the schema, the element appinfo:ReferenceTarget SHALL identify the XML Schema type definition of an element information item to which an instance of a reference element may validly refer. The element appinfo:ReferenceTarget SHALL NOT be used for any other purpose.
Manual Fail | 0 | NIEM-2.1_7-33_REF_EXT: appinfo:ReferenceTarget appinfo:namespace reference. | Within the schema, an attribute appinfo:namespace carried by an element appinfo:ReferenceTarget SHALL indicate the namespace of the referenced schema component. The indicated namespace SHALL be defined by a reference or extension schema.
Manual Fail | 0 | NIEM-2.1_7-36_REF_SUB_EXT: Simple type metadata and properties. | Within the schema, a simple type definition that uses xsd:list SHOULD NOT be defined if any member of the list requires a property or metadata that is different than other members of the list. All members of the list SHOULD have the same metadata, and should be related via the same properties.
Manual Fail | 0 | NIEM-2.1_7-37_REF_SUB_EXT: ComplexType definition. | Within the schema, a complex type definition SHALL be one of the following classes of types: 1. An object type. 2. A role type. 3. An association type. 4. A metadata type. 5. An augmentation type. 6. An adapter type.
Manual Fail | 0 | NIEM-2.1_7-38_REF_SUB_EXT: An element must not be introduced more than once into the direct content of a type definition. | Within the schema, an element MUST NOT be introduced more than once into the direct content of a type definition. This applies to content acquired through extension of base types. This does not apply to a base element or derived element to one previously existing in the type definition.
Manual Fail | 0 | NIEM-2.1_7-39_REF_EXT: ComplexType definition. | Within the schema, an object type SHALL be a complex type definition that either constitutes a NIEM-conformant component or for which there exists a NIEM-conformant component of one of the following forms: 1. Has simple content, is based on a simple type, and contains the attribute group structures:SimpleObjectAttributeGroup, and has application information appinfo:Base of structures:Object. 2. Has complex content, and is based on complex type structures:ComplexObjectType, and has application information appinfo:Base of structures:Object. 3. Is a complex type that is derived from an object type, which is defined according to this rule.
Manual Fail | 0 | NIEM-2.1_7-40_REF_SUB_EXT: RoleOf elements. | Within the schema, any element with a name beginning with the string RoleOf SHALL represent a base type, of which the containing type represents a role.
Manual Fail | 0 | NIEM-2.1_7-41_REF_EXT: Association complex type definition. | Within the schema, an association type SHALL be a complex type definition that either constitutes a NIEM-conformant component or for which there exists a NIEM-conformant component definition. The NIEM-conformant component definition SHALL have one of the following forms: 1. Has complex content, is based on the complex type structures:ComplexObjectType, and has application information appinfo:Base of structures:Association. 2. Is a complex type that is derived from an association type, which is defined according to this rule.
Manual Fail | 0 | NIEM-2.1_7-42_REF_SUB_EXT: association type reference elements. | Given that an association type defines a relationship between a set of participants, within an association type definition, any element that represents a participant SHALL be a reference element.
Manual Fail | 0 | NIEM-2.1_7-43_REF_SUB_EXT: metadata type elements. | Within the schema, a metadata type SHALL contain elements appropriate for a specific class of data about data.
Manual Fail | 0 | NIEM-2.1_7-47_REF_SUB_EXT: Augmentation Type. | An augmentation type: 1. SHALL be transitively derived from structures:AugmentationType. 2. SHALL contain elements that represent properties to be applied to a base type.
Manual Fail | 0 | NIEM-2.1_7-51_REF_SUB_EXT: Component type definition references. | Any type definition referenced by a component within the schema MUST be from one of the following: 1. The schema being defined. 2. A namespace imported as NIEM-conformant. 3. The XML Schema namespace. 4. The structures namespace.
Manual Fail | 0 | NIEM-2.1_7-52_REF_SUB_EXT: Component element declaration references. | Any element declaration referenced by a component within the schema MUST be from one of the following: 1. The schema being defined. 2. A namespace imported as NIEM-conformant. 3. The structures namespace. 4. An external namespace, in accordance with the rules for external schemas as specified by this specification.
Manual Fail | 0 | NIEM-2.1_7-53_REF_SUB_EXT: Componenet attribute declaration references. | Any attribute declaration referenced by a component within the schema MUST be from one of the following: 1. The schema being defined. 2. A namespace imported as NIEM-conformant. 3. The structures namespace. 4. The XML namespace. 5. An external namespace, in accordance with the rules for external schemas as specified by this specification.
Manual Fail | 0 | NIEM-2.1_7-55_REF_SUB_EXT_INS: Schema must use content within the NDR strucures namespace as specified. | The schema or instance MUST use content within the NIEM structures namespace as specified in this document and ONLY as specified by this document.
Manual Fail | 0 | NIEM-2.1_7-56_REF_SUB_EXT: ComplexType definition structures:sequenceID. | Within the schema, a complex type definition SHALL include the attribute structures:sequenceID if the order of an occurrence of the type, within its parent, relative to its siblings, is meaningful and pertinent and if the schema does not specify the desired sequential order.
Manual Fail | 0 | NIEM-2.1_7-57_REF_SUB_EXT: Reference elements. | Within the schema, a reference element and only a reference element SHALL be defined to be of type structures:ReferenceType.
Manual Fail | 0 | NIEM-2.1_7-59_REF_SUB_EXT: NCName and NCNameReference Elements. | Within the schema, any two elements of the form NCName and NCNameReference where the string value of NCName is the same in both forms, SHALL be defined to have identical semantics. NIEM recognizes no difference in meaning between a reference element and an element that is not a reference element.
Manual Fail | 0 | NIEM-2.1_7-60_REF_EXT: appinfo:ReferenceTarget for NCNameReference. | Within the schema, if both elements NCName and NCNameReference exist, then the appinfo:ReferenceTarget of any NCNameReference element MUST be the type of the element NCName.
Manual Fail | 0 | NIEM-2.1_7-63_REF_EXT: AdapterType application information. | Within the schema, an adapter type MUST have application information appinfo:ExternalAdapterTypeIndicator with a value of true. A type that is not an adapter type SHALL NOT contain that indicator.
Manual Fail | 0 | NIEM-2.1_7-65_REF_SUB_EXT: AdapterType composition. | Within the schema, an adapter type MUST be composed of only elements and attributes from an external standard.
Manual Fail | 0 | NIEM-2.1_7-69_SUB: targetNamespace attribute value. | The value of the targetNamespace attribute owned by the xsd:schema document element of the subset schema must be the same as the value of the targetNamespace attribute owned by the xsd:schema document element of the reference schema.
Manual Fail | 0 | NIEM-2.1_7-70_SUB: Schema construction. | The schema must be constructed such that any instance that is XML Schema valid against the schema must also be XML Schema valid against the base schema.
Manual Fail | 0 | NIEM-2.1_8-01_INS: XML document must be schema-valid. | The XML document MUST be schema-valid, assessed with reference to the schema composed of the reference schemas, extension schemas, exchange schemas, utility schemas, and external schemas for the relevant namespaces.
Manual Fail | 0 | NIEM-2.1_8-04_INS: ID attribute value | Given that the IDREF that is the value of an attribute structures:ref matches the value of an ID attribute on some element in the XML document, that ID attribute must be an occurrence of the attribute structures:id.
Manual Fail | 0 | NIEM-2.1_8-05_INS: attribute structures:ref reference. | Within an element instance, given that a reference element is restricted to a target type T, any attribute structures:ref MUST reference an element that has a type definition of type T or that is derived from type T.
Manual Fail | 0 | NIEM-2.1_8-07_REF_EXT_INS: structures:sequenceID interpretation. | Within a schema or instance, the attribute structures:sequenceID SHALL NOT be interpreted as meaningful beyond an indicator of sequential order of an object relative to its siblings.
Manual Fail | 0 | NIEM-2.1_8-08_INS: Object metadata. | Within an element instance, when an object O links to a metadata object via an attribute structures:metadata, the information in the metadata object SHALL be applied to the object O.
Manual Fail | 0 | NIEM-2.1_8-09_INS: Element relationship metadata. | Within an element instance, when an object O1 contains an element E, with content object O2 or with a reference to object O2, and O2 links to a metadata object via an attribute structures:linkMetadata, the information in the metadata object SHALL be applied to the relationship E between O1 and O2.
Manual Fail | 0 | NIEM-2.1_8-10_INS: ID attribute must be an occurrence of the attribute structures:id. | Given that each IDREF in the value of an attribute structures:metadata must match the value of an ID attribute on some element in the XML document, that ID attribute MUST be an occurrence of the attribute structures:id.
Manual Fail | 0 | NIEM-2.1_8-11_INS: Elements refrenced by structures:metadata must have a type definition that is derived from structures:MetadataType. | Each element that an attribute structures:metadata references MUST have a type definition that is derived from structures:MetadataType.
Manual Fail | 0 | NIEM-2.1_8-12_INS: ID attribute must be an occurrence of the attribute structures:id. | Given that each IDREF in the value of an attribute structures:linkMetadata must match the value of an ID attribute on some element in the XML document, that ID attribute MUST be an occurrence of the attribute structures:id.
Manual Fail | 0 | NIEM-2.1_8-13_INS: Attributes refrenced by structures:metadata must have a type definition that is derived from structures:MetadataType. | Each element that an attribute structures:linkMetadata references MUST have a type definition that is derived from structures:MetadataType.
Manual Fail | 0 | NIEM-2.1_8-14_INS: element information item and type definition relationship. | Given that an element information item E has a type definition of some type T, each metadata type that is the type definition of an element information item referenced by an attribute structures:metadata or structures:linkMetadata on element E MUST be applicable to T.
Manual Fail | 0 | NIEM-2.1_9-02_REF_SUB_EXT: XML Schema component name must be English. | The name of any XML Schema component defined by the schema SHALL be composed of words from the English language, using the prevalent U.S. spelling, as provided by [OED].
Manual Fail | 0 | NIEM-2.1_9-04_REF_SUB_EXT: Component name hyphen characters. | The hyphen character ('-') MAY appear in component names only when used as a separator between parts of a single word, phrase, or value, which would otherwise be incomprehensible without the use of a separator.
Manual Fail | 0 | NIEM-2.1_9-07_REF_SUB_EXT: XML Schema component name shall use camel case. | The name of any XML Schema component defined by the schema SHALL use the camel case formatting convention.
Manual Fail | 0 | NIEM-2.1_9-08_REF_SUB_EXT: Schema MUST consistently use approved acronyms, abbreviations, and word truncations within defined names | The schema MUST consistently use approved acronyms, abbreviations, and word truncations within defined names. The approved shortened forms are defined in Table 9-1 Abbreviations Used in NIEM Names.
Manual Fail | 0 | NIEM-2.1_9-09_REF_SUB_EXT: Noun use in XML Schema component names. | A noun used as a term in the name of an XML Schema component MUST be in singular form unless the concept itself is plural.
Manual Fail | 0 | NIEM-2.1_9-10_REF_SUB_EXT: Verb use in XML Schema component names. | A verb used as a term in the name of an XML Schema component MUST be used in the present tense unless the concept itself is past tense.
Manual Fail | 0 | NIEM-2.1_9-11_REF_SUB_EXT: Articles, conjunctions, and prepositions must not be used in NDR component names. | Articles, conjunctions, and prepositions SHALL NOT be used in NIEM component names except where they are required for clarity or by standard convention.
Manual Fail | 0 | NIEM-2.1_9-12_REF_SUB_EXT: Element and Attribute name format. | Except as specified elsewhere in this document, any element or attribute defined within the schema SHALL have a name that takes the form: *Object-class qualifier terms (0 or more). *An object class term (1). *Property qualifier terms (0 or more). *A property term (1). *Representation qualifier terms (0 or more). *A representation term (1).
Manual Fail | 0 | NIEM-2.1_9-13_REF_SUB_EXT: Object-class term of a NIEM component. | The object-class term of a NIEM component SHALL consist of a term identifying a category of concrete concepts or entities.
Manual Fail | 0 | NIEM-2.1_9-14_REF_SUB_EXT: Property terms. | A property term SHALL describe or represent a characteristic or subpart of an entity or concept.
Manual Fail | 0 | NIEM-2.1_9-16_REF_SUB_EXT: Number of qualifier terms should be limited. | The number of qualifier terms SHOULD be limited to the absolute minimum required to make the component name unique and understandable.
Manual Fail | 0 | NIEM-2.1_9-17_REF_SUB_EXT: Qualifier order. | The order of qualifiers SHALL NOT be used to differentiate names.
Manual Fail | 0 | NIEM-2.1_9-18_REF_EXT: Representation term and Property term redundancy. | If any word in the representation term is redundant with any word in the property term, one occurrence SHOULD be deleted.
Manual Fail | 0 | NIEM-2.1_9-20_REF_SUB_EXT: Complex Content element declaration names in Table 9-2. | Within the schema, the name of an element declaration that is of complex content, and that corresponds to a concept listed in Table 9-2: Representation Terms, MUST use a representation term from that table.
Manual Fail | 0 | NIEM-2.1_9-21_REF_SUB_EXT: Complex Content element declaration names in Table 9-2. | Within the schema, the name of an element declaration that is of complex content and that does not correspond to a concept listed in Table 9-2: Representation Terms MUST NOT use a representation term.
Manual Fail | 0 | NIEM-2.1_9-22_REF_SUB_EXT: Complex Content element declaration names not in Table 9-2 | Within the schema, the name of an attribute declaration MUST use a representation term from Table 9-2: Representation Terms.
Manual Fail | 0 | NIEM-2.1_9-27_REF_SUB_EXT: Association types shall have a name that uses the representation term qualifier Association. | Within the schema, any association type SHALL have a name that uses the representation term qualifier Association. Types other than association types SHALL NOT use the representation term qualifier Association.

All Rules (183)
Provides a detailed look at the status of each rule, whether it resulted in any results. Also provided a quick summary about the rule. The "status" of a rule is defined to be the worst status out of the collection of results.

Status | Results | Name | Description
--- | --- | --- | ---
Auto Pass | 0 | NIEM-2.1_5-01: XML Schema Conformance | The schema MUST conform to XML as specified by [XML].
Auto Pass | 0 | NIEM-2.1_5-02_REF_SUB_EXT_CON: | The schema MUST conform to the specification for namespaces in XML, as defined by [XMLNamespaces] and [XMLNamespacesErrata].
Auto Pass | 0 | NIEM-2.1_5-03_REF_SUB_EXT_CON: | The schema MUST conform to the W3C XML Schema Recommendations: XML Schema Part 1: Structures and XML Schema Part 2: Datatypes, as specified by [XMLSchemaStructures] and [XMLSchemaDatatypes].
Manual Fail | 0 | NIEM-2.1_5-04_REF_EXT: | Within a NIEM-conformant schema, the data definition provided for each documented component SHALL follow the requirements and recommendations for data definitions given by [ISO 11179 Part 4].
Manual Fail | 0 | NIEM-2.1_5-05_REF_SUB_EXT: | A NIEM component name SHALL be formed by applying the informative guidelines and examples detailed in Annex A of [ISO 11179 Part 5], with exceptions as specified in this document, most notably those specified in Section 9, Naming Rules.
Auto Pass | 0 | NIEM-2.1_6-01_REF_SUB_EXT: Complex Types may not have Mixed Content | Within the schema, an element xsd:complexType SHALL NOT own the attribute mixed with the value true.
Auto Pass | 0 | NIEM-2.1_6-02_REF_SUB_EXT: Element Declarations may not have Mixed Content | Within the schema, an element declaration that is of complex content SHALL NOT own the attribute mixed with the value true
Auto Pass | 0 | NIEM-2.1_6-03_REF_SUB_EXT: No reference to xsd:NOTATION. | The schema SHALL NOT contain a reference to the type definition xsd:NOTATION or to a type derived from that type.
Auto Pass | 0 | NIEM-2.1_6-04_REF_SUB_EXT: No use of xsd:notation. | The schema SHALL NOT contain the element xsd:notation.
Auto Pass | 0 | NIEM-2.1_6-05_REF_SUB_EXT: No use of xsd:include. | The schema SHALL NOT contain the element xsd:include.
Auto Pass | 0 | NIEM-2.1_6-06_REF_SUB_EXT: No use of xsd:redefine. | The schema SHALL NOT contain the element xsd:redefine.
Auto Pass | 0 | NIEM-2.1_6-07_REF_SUB_EXT: No use of xsd:anyType. | The schema SHALL NOT reference the type xsd:anyType.
Manual Fail | 0 | NIEM-2.1_6-08_REF_SUB_EXT: No unconstrained type substition - anySimpleType. | The schema SHALL NOT reference the type xsd:anySimpleType.
Auto Pass | 0 | NIEM-2.1_6-09_REF_SUB_EXT: Untyped elements must be abstract. | Within the schema, an element declaration with the attribute name and without the attribute type MUST carry the attribute abstract with the value true.
Auto Pass | 0 | NIEM-2.1_6-10_REF_SUB_EXT: No untyped attributes. | Within the schema, an attribute declaration with attribute name MUST carry the attribute type.
Auto Pass | 0 | NIEM-2.1_6-11_REF_SUB: No use of xsd:any. | The schema SHALL NOT contain the element xsd:any.
Auto Pass | 0 | NIEM-2.1_6-12_REF_SUB_EXT: No use of xsd:anyAttribute. | The schema SHALL NOT contain the element xsd:anyAttribute.
Auto Pass | 0 | NIEM-2.1_6-13_REF_SUB_EXT: No anonymous types. | Within the schema, any occurrence of the element xsd:complexType or xsd:simpleType MUST appear as an immediate child of the element xsd:schema.
Auto Pass | 0 | NIEM-2.1_6-14_REF_SUB_EXT: No local element declarations. | Within the schema, any element declaration carrying the attribute name MUST appear as an immediate child of the document element xsd:schema.
Auto Pass | 0 | NIEM-2.1_6-15_REF_SUB_EXT: No local attribute declarations. | Within the schema, any attribute declaration owning the attribute name MUST appear as an immediate child of the document element xsd:schema.
Auto Pass | 0 | NIEM-2.1_6-16_REF_EXT: No uniqueness constraints. | The schema SHALL NOT contain any of the elements xsd:unique, xsd:key, xsd:keyref, xsd:selector, or xsd:field.
Auto Pass | 0 | NIEM-2.1_6-17_REF_SUB_EXT: No use of all or choice. | The schema SHALL NOT contain the element xsd:all.
Auto Pass | 0 | NIEM-2.1_6-18_REF: No use of all or choice. | The schema SHALL NOT contain the element xsd:choice.
Auto Pass | 0 | NIEM-2.1_6-19_REF_SUB: child of xsd:sequence must be annotation or element. | Within the schema, any immediate child of a model group xsd:sequence element MUST be one of xsd:annotation or xsd:element.
Auto Pass | 0 | NIEM-2.1_6-20_EXT: No recursively defined model groups - xsd:sequence | Within the schema, any immediate child of a model group xsd:sequence element MUST be one of xsd:annotation, xsd:element, xsd:choice, or xsd:any.
Auto Pass | 0 | NIEM-2.1_6-21_EXT: No recursively defined model groups - xsd:choice. | Within the schema, any immediate child of a model group xsd:choice element MUST be one of xsd:annotation or xsd:element.
Manual Fail | 0 | NIEM-2.1_6-22_EXT: No recursively defined model groups - xsd:choice. | The use of xsd:choice SHALL define syntax, structure, grouping, and cardinality of instances, but SHALL NOT define semantics. The semantics of a property within an xsd:choice SHALL be identical to the semantics of the property within an xsd:sequence.
Auto Pass | 0 | NIEM-2.1_6-23_REF_SUB_EXT: No use of xsd:group | The schema SHALL NOT contain the element xsd:group.
Auto Pass | 0 | NIEM-2.1_6-24_REF_SUB_EXT: Sequence minoccurs can only be 1. | Within the schema, if the element xsd:sequence carries the attribute minOccurs, it MUST set the value for the attribute to 1.
Auto Pass | 0 | NIEM-2.1_6-25_REF_SUB_EXT: Sequence maxOccurs can only be 1. | Within the schema, if the element xsd:sequence carries the attribute maxOccurs, it MUST set the value of the attribute to 1.
Auto Pass | 0 | NIEM-2.1_6-26_REF_EXT: No blocking in element declaration. | Within the schema, if an element declaration carries the attribute block, it MUST set the value for the attribute to the empty string.
Auto Pass | 0 | NIEM-2.1_6-27_REF_EXT: No blocking in element declaration. | Within the schema, if a complex type definition carries the attribute block, it MUST set the value for the attribute to the empty string.
Auto Pass | 0 | NIEM-2.1_6-28_REF_SUB_EXT: No blocking as schema default. | Within the schema, if the document element xsd:schema carries the attribute blockDefault, it MUST set the value for the attribute to the empty string.
Auto Pass | 0 | NIEM-2.1_6-29_REF_SUB: No final in a simple type definition. | Within the schema, if a simple type definition carries the attribute final, it MUST set the value for the attribute to the empty string.
Auto Pass | 0 | NIEM-2.1_6-30_REF_SUB: No final in a complex type definition. | Within the schema, if a complex type definition carries the attribute final, it MUST set the value for the attribute to the empty string.
Auto Pass | 0 | NIEM-2.1_6-31_REF_SUB: No final in an element declaration. | Within the schema, if an element declaration carries the attribute final, it MUST set the value for the attribute to the empty string.
Auto Pass | 0 | NIEM-2.1_6-32_REF_SUB_EXT: No final as schema default. | Within the schema, if the document element xsd:schema carries the attribute finalDefault, it MUST set the value for that attribute to the empty string.
Auto Pass | 0 | NIEM-2.1_6-33_REF_SUB_EXT_CON: No default in elements. | Within the schema, any element xsd:element SHALL NOT carry the attribute default.
Auto Pass | 0 | NIEM-2.1_6-34_REF_SUB_EXT_CON: No default in attributes. | Within the schema, any element xsd:attribute SHALL NOT carry the attribute default.
Auto Pass | 0 | NIEM-2.1_6-35_REF_SUB_EXT_CON: Schema must have target namespace. | Within the schema, the document element xsd:schema MUST carry the attribute targetNamespace.
Auto Pass | 0 | NIEM-2.1_6-36_REF_SUB_EXT_CON: Schema element targetName must be an absolute URI. | Within the schema, the value of the required attribute targetNamespace on the document element xsd:schema MUST match the production <absolute-URI> as defined by [RFC3986].
Auto Pass | 0 | NIEM-2.1_6-37_REF_SUB_EXT_CON: xsd:schema must have version attribute. | Within the schema, the document element xsd:schema MUST carry the attribute version.
Auto Pass | 0 | NIEM-2.1_6-38_REF_SUB_EXT_CON: xsd:schema version attribute cannot be empty. | Within the schema, the value of the required attribute version on the document element xsd:schema MUST NOT be an empty string.
Auto Pass | 0 | NIEM-2.1_6-39_REF_SUB_EXT_CON: xsd:import attribute namespace required. | Within the schema, the element xsd:import MUST carry the attribute namespace.
Auto Pass | 0 | NIEM-2.1_6-40_REF_SUB_EXT: xsd:import namespace must be an absolute URI as defined by [RFC3986]. | Within the schema, the value of the required attribute namespace owned by the element xsd:import MUST match the production <absolute-URI> as defined by [RFC3986].
Auto Pass | 0 | NIEM-2.1_6-41_REF_SUB_EXT: xsd:import attribute schemaLocation required. | Within the schema, the element xsd:import MUST carry the attribute schemaLocation.
Auto Pass | 0 | NIEM-2.1_6-42_REF_SUB_EXT: schemaLocation must be an absolute-URI or a relative-path reference as defined by [RFC3986]. | Within the schema, the value of the required attribute schemaLocation carried by the element xsd:import MUST match either the production <absolute-URI> or the definition of "relative-path reference," as defined by [RFC3986].
Auto Pass | 0 | NIEM-2.1_6-43_REF_SUB_EXT: schemaLocations of imports must resolve. | Within the schema, the value of the required attribute schemaLocation carried by the element xsd:import MUST be resolvable to an XML schema document file that is valid according to [XMLSchemaStructures] and [XMLSchemaDatatypes].
Auto Pass | 0 | NIEM-2.1_6-44_REF_SUB_EXT: Namespaces other than the XML namespace or XML Schema namespace must be imported. | Within the schema, when a namespace other than the XML namespace or the XML Schema namespace is used, it MUST be imported into the schema using the xsd:import element.
Manual Fail | 0 | NIEM-2.1_6-45_REF_SUB_EXT: | Within the schema, when a namespace other than the XML namespace or the XML Schema namespace is used, its content MUST be valid with respect to the schema imported for that namespace.
Auto Pass | 0 | NIEM-2.1_6-46_REF_EXT: One annotation only | Within the schema, an element SHALL have at most one instance of an element xsd:annotation as an immediate child.
Manual Fail | 0 | NIEM-2.1_6-47_REF_EXT: Human-Readable Documentation | Within the schema, the content of the xsd:documentation element that constitutes the data definition of a component MUST be character information items as specified by [XMLInfoSet].
Manual Fail | 0 | NIEM-2.1_6-48_REF_SUB_EXT: | XML comments SHALL not be used for persistent information about constructs within the schema.
Manual Fail | 0 | NIEM-2.1_6-49_REF_EXT: xsd:appinfo child element must be EII or CII. | Within the schema, any immediate child of an xsd:appinfo element SHALL be an element information item or a comment information item.
Auto Pass | 0 | NIEM-2.1_6-50_REF_EXT: xsd:appinfo child element must be in a namespace. | Within the schema, any element that is an immediate child of an xsd:appinfo element SHALL be in a namespace.
Auto Pass | 0 | NIEM-2.1_6-51_REF_EXT: xsd:appinfo descendant cannot be from XML Schema namespace. | Within the schema, an element in the XML Schema namespace MUST NOT occur as a descendant of any element xsd:appinfo.
Auto Pass | 0 | NIEM-2.1_6-52_REF_SUB_EXT: xsd:complexType children. | Within the schema, the element xsd:complexType MUST have as an immediate child either the element xsd:complexContent or the element xsd:simpleContent.
Auto Pass | 0 | NIEM-2.1_6-53_REF: xsd:simpleContent immediate child. | Within the schema, the element xsd:simpleContent MUST have as an immediate child the element xsd:extension.
Manual Fail | 0 | NIEM-2.1_6-54_REF_SUB_EXT: simpleType xsd:extension. | Within the schema, given an element xsd:simpleContent with a child xsd:extension owning an attribute base, if the attribute base has a value that resolves to the name of a simple type, then the element xsd:extension MUST have an immediate child element xsd:attributeGroup.
Auto Pass | 0 | NIEM-2.1_6-55_REF: xsd:complexContent immediate child. | Within the schema, the element xsd:complexContent MUST have as an immediate child the element xsd:extension.
Auto Pass | 0 | NIEM-2.1_6-56_REF_SUB_EXT: xsd:complexContent xsd:extension base attribute value. | Within the schema, given an element xsd:complexContent with a child xsd:extension owning an attribute base, the attribute base MUST have a value that resolves to the name of one of the following: 1. The type structures:ComplexObjectType. 2. The type structures:MetadataType. 3. The type structures:AugmentationType. 4. A complex type that is a NIEM-conformant component.
Auto Pass | 0 | NIEM-2.1_6-57_EXT: xsd:complexContent xsd:restriction base attribute value. | Within the schema, given an element xsd:complexContent with a child xsd:restriction owning an attribute base, the attribute base MUST have a value that resolves to the name of a complex type that is a NIEM-conformant component.
Auto Pass | 0 | NIEM-2.1_6-58_REF_SUB_EXT: xsd:attributeGroup ref attribute. | Within the schema, any occurrence of the element xsd:attributeGroup MUST own an attribute ref.
Auto Pass | 0 | NIEM-2.1_6-59_REF_SUB_EXT: xsd:attributeGroup ref value. | Within the schema, the attribute ref owned by any element xsd:attributeGroup MUST have a value of a qualified name (possibly using the default namespace) that SHALL resolve to the namespace for the NIEM structures namespace and the local name SimpleObjectAttributeGroup.
Auto Pass | 0 | NIEM-2.1_7-01_REF_EXT: | Within the schema, the document element xsd:schema MUST have application information appinfo:ConformantIndicator, with text content "true".
Manual Fail | 0 | NIEM-2.1_7-02_REF_SUB_EXT_CON: | Two XML Schema documents SHALL have the same value for attribute targetNamespace carried by the element xsd:schema, if and only if they represent the same set of components.
Manual Fail | 0 | NIEM-2.1_7-03_REF_SUB_EXT_CON: | Two XML Schema documents SHALL have the same value for attribute targetNamespace carried by the element xsd:schema, and different values for attribute version carried by the element xsd:schema if and only if they are different views of the same set of components.
Auto Pass | 0 | NIEM-2.1_7-04_REF_EXT: xsd:complexType documentation. | Within the schema, any element xsd:complexType MUST be a documented component.
Auto Pass | 0 | NIEM-2.1_7-05_REF_EXT: xsd:simpleType documentation. | Within the schema, any element xsd:simpleType MUST be a documented component.
Auto Pass | 0 | NIEM-2.1_7-06_REF_EXT: xsd:element documentation. | Within the schema, any element xsd:element that is an immediate child of an element xsd:schema MUST be a documented component.
Auto Pass | 0 | NIEM-2.1_7-07_REF_EXT: xsd:attribute documentation. | Within the schema, any element xsd:attribute that is an immediate child of an element xsd:schema MUST be a documented component.
Auto Pass | 0 | NIEM-2.1_7-08_REF_EXT: xsd:enumeration documentation. | Within the schema, any element xsd:enumeration MUST be a documented component.
Auto Pass | 0 | NIEM-2.1_7-09_REF_EXT: xsd:schema documentation. | Within the schema, the document element xsd:schema MUST be a documented component.
Manual Fail | 0 | NIEM-2.1_7-10_REF_EXT: data element definition. | Words or synonyms for the words within a data element definition SHALL NOT be reused as terms in the corresponding component name if those words dilute the semantics and understanding of, or impart ambiguity to, the entity or concept that the component represents.
Manual Fail | 0 | NIEM-2.1_7-11_REF_EXT: object semantic meaning. | An object class SHALL have one and only one associated semantic meaning (i.e., a single word sense) as described in the definition of the component that represents that object class.
Manual Fail | 0 | NIEM-2.1_7-12_REF_EXT: object definition. | An object class SHALL NOT be redefined within the definitions of the components that represent properties or subparts of that entity or class.
Manual Fail | 0 | NIEM-2.1_7-13_REF_EXT: data definition. | A data definition SHALL NOT contain explicit representational or data typing information such as number characters, type of characters, etc., unless the very nature of the component can be described only by such information.
Manual Fail | 0 | NIEM-2.1_7-14_REF_EXT: Standard Opening Phrases | A component definition SHALL begin with a standard opening phrase that depends on the class of the component per Table 7-2: Standard Opening Phrases.
Auto Pass | 0 | NIEM-2.1_7-15_REF_EXT: appinfo namespace must be imported. | The schema SHALL import the appinfo namespace.
Manual Fail | 0 | NIEM-2.1_7-16_REF_EXT: deprecated components. | A component that is deprecated SHALL be indicated as such by the component having application information appinfo:Deprecated, with an attribute value with a value of true.
Auto Pass | 0 | NIEM-2.1_7-17_REF_EXT: appinfo:Base usage. | Within the schema, the element appinfo:Base MAY be used in one of the following ways: 1. By a type definition, to indicate the base type, or structures:Object or structures:Association. 2. By an element declaration, to indicate the base element. The element appinfo:Base SHALL NOT be used for any other purpose.
Auto Pass | 0 | NIEM-2.1_7-18_REF_EXT: | Within the schema, the element appinfo:Base SHALL indicate, by namespace and name, one of the following: 1. A NIEM-conformant schema component. 2. structures:Object. 3. structures:Association.
Auto Pass | 0 | NIEM-2.1_7-19_REF_EXT: appinfo:Base appinfo:namespace attribute value. | Within the schema, an attribute appinfo:namespace owned by an element appinfo:Base SHALL have a value of either of the following: 1. A namespace which is the target namespace of a NIEM-conformant schema. 2. The structures namespace.
Auto Pass | 0 | NIEM-2.1_7-20_REF_EXT: appinfo:Base with no appinfo:namespace attribute. | Within the schema, an element appinfo:Base that does not own an attribute appinfo:namespace SHALL refer to the target namespace of the schema in which it is used.
Auto Pass | 0 | NIEM-2.1_7-21_REF_EXT: appinfo:Base must have appinfo:name. | Within the schema, an element appinfo:Base SHALL own an attribute appinfo:name.
Auto Pass | 0 | NIEM-2.1_7-22_REF_EXT: appinfo:name value for NIEM-conformant namespace in appinfo:Base. | Within the schema, if an element appinfo:Base references a NIEM-conformant namespace, then the value of the attribute appinfo:name owned by the element appinfo:Base SHALL indicate a schema component in the referenced namespace.
Auto Pass | 0 | NIEM-2.1_7-23_REF_EXT: appinfo:name value for structures namespace in appinfo:Base | Within the schema, if an element appinfo:Base indicates the structures namespace, then the value of the attribute appinfo:name owned by the element appinfo:Base SHALL have a value of one of the following: 1. structures:Object. 2. structures:Association. 3. A schema component defined by the structures schema.
Auto Pass | 0 | NIEM-2.1_7-24_REF_EXT: appinfo:AppliesTo usage. | Within the schema, the element appinfo:AppliesTo MAY be used in any of the following ways: 1. To indicate a base type to which an augmentation may be applied. 2. To indicate a base type to which a metadata type may be applied. The element appinfo:AppliesTo SHALL NOT be used for any other purpose.
Auto Pass | 0 | NIEM-2.1_7-25_REF_EXT: appinfo:AppliesTo must have namespace and name. | Within the schema, the element appinfo:AppliesTo SHALL indicate a schema component by namespace and name.
Auto Pass | 0 | NIEM-2.1_7-26_REF_EXT: appinfo:namespace must indicate the namespace of the type referenced by appinfo:AppliesTo. | Within the schema, an attribute appinfo:namespace owned by an element appinfo:AppliesTo SHALL indicate the namespace of the type to which appinfo:AppliesTo refers. The indicated namespace SHALL be defined by a NIEM-conformant schema.
Auto Pass | 0 | NIEM-2.1_7-27_REF_EXT: appinfo:AppliesTo applicability. | Given that the element appinfo:AppliesTo refers to a type, the applicability described by the element SHALL be understood to be the indicated type or a type transitively derived from the indicated type.
Auto Pass | 0 | NIEM-2.1_7-28_REF_EXT: appinfo:AppliesTo without appinfo:namespace. | Within the schema, an element appinfo:AppliesTo that does not carry an attribute appinfo:namespace SHALL refer to the target namespace of the schema in which it is used.
Auto Pass | 0 | NIEM-2.1_7-29_REF_EXT: appinfo:AppliesTo must have appinfo:name. | Within the schema, an element appinfo:AppliesTo SHALL carry an attribute appinfo:name. The value of this attribute SHALL indicate the local name of a schema component within the namespace specified by the element.
Manual Fail | 0 | NIEM-2.1_7-30_REF_EXT: appinfo:ReferenceTarget must contain a valid type. | Within the schema, the element appinfo:ReferenceTarget SHALL identify the XML Schema type definition of an element information item to which an instance of a reference element may validly refer. The element appinfo:ReferenceTarget SHALL NOT be used for any other purpose.
Auto Pass | 0 | NIEM-2.1_7-31_REF_EXT: A reference element must have at most one instance of appinfo:ReferenceTarget | Within the schema, a reference element MUST have at most one instance of the element appinfo:ReferenceTarget.
Auto Pass | 0 | NIEM-2.1_7-32_REF_EXT: appinfo:ReferenceTarget must indicate a type definition schema component, by namespace and name. | Within the schema, the element appinfo:ReferenceTarget SHALL indicate a type definition schema component, by namespace and name.
Manual Fail | 0 | NIEM-2.1_7-33_REF_EXT: appinfo:ReferenceTarget appinfo:namespace reference. | Within the schema, an attribute appinfo:namespace carried by an element appinfo:ReferenceTarget SHALL indicate the namespace of the referenced schema component. The indicated namespace SHALL be defined by a reference or extension schema.
Auto Pass | 0 | NIEM-2.1_7-34_REF_EXT: appinfo:ReferenceTarget with no appinfo:namespace. | Within the schema, an element appinfo:ReferenceTarget that does not carry an attribute appinfo:namespace SHALL refer to the target namespace of the schema in which it is used.
Auto Pass | 0 | NIEM-2.1_7-35_REF_EXT: appinfo:ReferenceTarget appinfo:name value. | Within the schema, an element appinfo:ReferenceTarget SHALL carry an attribute appinfo:name. The value of this attribute SHALL indicate the local name of a type definition schema component within the namespace specified by the element.
Manual Fail | 0 | NIEM-2.1_7-36_REF_SUB_EXT: Simple type metadata and properties. | Within the schema, a simple type definition that uses xsd:list SHOULD NOT be defined if any member of the list requires a property or metadata that is different than other members of the list. All members of the list SHOULD have the same metadata, and should be related via the same properties.
Manual Fail | 0 | NIEM-2.1_7-37_REF_SUB_EXT: ComplexType definition. | Within the schema, a complex type definition SHALL be one of the following classes of types: 1. An object type. 2. A role type. 3. An association type. 4. A metadata type. 5. An augmentation type. 6. An adapter type.
Manual Fail | 0 | NIEM-2.1_7-38_REF_SUB_EXT: An element must not be introduced more than once into the direct content of a type definition. | Within the schema, an element MUST NOT be introduced more than once into the direct content of a type definition. This applies to content acquired through extension of base types. This does not apply to a base element or derived element to one previously existing in the type definition.
Manual Fail | 0 | NIEM-2.1_7-39_REF_EXT: ComplexType definition. | Within the schema, an object type SHALL be a complex type definition that either constitutes a NIEM-conformant component or for which there exists a NIEM-conformant component of one of the following forms: 1. Has simple content, is based on a simple type, and contains the attribute group structures:SimpleObjectAttributeGroup, and has application information appinfo:Base of structures:Object. 2. Has complex content, and is based on complex type structures:ComplexObjectType, and has application information appinfo:Base of structures:Object. 3. Is a complex type that is derived from an object type, which is defined according to this rule.
Manual Fail | 0 | NIEM-2.1_7-40_REF_SUB_EXT: RoleOf elements. | Within the schema, any element with a name beginning with the string RoleOf SHALL represent a base type, of which the containing type represents a role.
Manual Fail | 0 | NIEM-2.1_7-41_REF_EXT: Association complex type definition. | Within the schema, an association type SHALL be a complex type definition that either constitutes a NIEM-conformant component or for which there exists a NIEM-conformant component definition. The NIEM-conformant component definition SHALL have one of the following forms: 1. Has complex content, is based on the complex type structures:ComplexObjectType, and has application information appinfo:Base of structures:Association. 2. Is a complex type that is derived from an association type, which is defined according to this rule.
Manual Fail | 0 | NIEM-2.1_7-42_REF_SUB_EXT: association type reference elements. | Given that an association type defines a relationship between a set of participants, within an association type definition, any element that represents a participant SHALL be a reference element.
Manual Fail | 0 | NIEM-2.1_7-43_REF_SUB_EXT: metadata type elements. | Within the schema, a metadata type SHALL contain elements appropriate for a specific class of data about data.
Auto Pass | 0 | NIEM-2.1_7-44_REF_SUB_EXT: metadata type derivation. | Within the schema, a metadata type and only a metadata type SHALL be derived directly from structures:MetadataType.
Auto Pass | 0 | NIEM-2.1_7-45_REF_EXT: metadata application information. | Within the schema, a metadata type MAY have application information appinfo:AppliesTo, indicating the NIEM-conformant object, association, or external adapter types to which the metadata applies.
Auto Pass | 0 | NIEM-2.1_7-46_REF_EXT: metadata with no application information. | Within the schema, a metadata type that does not have application information appinfo:AppliesTo MAY be applied to any object type, association type, or external adapter type.
Manual Fail | 0 | NIEM-2.1_7-47_REF_SUB_EXT: Augmentation Type. | An augmentation type: 1. SHALL be transitively derived from structures:AugmentationType. 2. SHALL contain elements that represent properties to be applied to a base type.
Auto Pass | 0 | NIEM-2.1_7-48_REF_SUB_EXT: Augmentation element definition. | Within the schema, an augmentation element definition: 1. SHALL have a type that is an augmentation type. 2. SHALL use the substitutionGroup attribute such that it is transitively substitutable for the element structures:Augmentation. An element that is not an augmentation element SHALL NOT meet either of the above criteria.
Auto Pass | 0 | NIEM-2.1_7-49_REF_EXT: Element definition structures:AppliesTo. | Within the schema, an element definition for an augmentation element MAY contain one or more instances of the element structures:AppliesTo as application information to specify types to which the augmentation element applies.
Auto Pass | 0 | NIEM-2.1_7-50_REF_EXT: Element definition for augmentation element with no structures:AppliesTo instances. | Within the schema, an element definition for an augmentation element that does not contain any instances of the element structures:AppliesTo MAY be applied to any object or association type.
Manual Fail | 0 | NIEM-2.1_7-51_REF_SUB_EXT: Component type definition references. | Any type definition referenced by a component within the schema MUST be from one of the following: 1. The schema being defined. 2. A namespace imported as NIEM-conformant. 3. The XML Schema namespace. 4. The structures namespace.
Manual Fail | 0 | NIEM-2.1_7-52_REF_SUB_EXT: Component element declaration references. | Any element declaration referenced by a component within the schema MUST be from one of the following: 1. The schema being defined. 2. A namespace imported as NIEM-conformant. 3. The structures namespace. 4. An external namespace, in accordance with the rules for external schemas as specified by this specification.
Manual Fail | 0 | NIEM-2.1_7-53_REF_SUB_EXT: Componenet attribute declaration references. | Any attribute declaration referenced by a component within the schema MUST be from one of the following: 1. The schema being defined. 2. A namespace imported as NIEM-conformant. 3. The structures namespace. 4. The XML namespace. 5. An external namespace, in accordance with the rules for external schemas as specified by this specification.
Auto Pass | 0 | NIEM-2.1_7-54_REF_EXT: NIEM structures namespace must be imported. | The schema MUST import the NIEM structures namespace.
Manual Fail | 0 | NIEM-2.1_7-55_REF_SUB_EXT_INS: Schema must use content within the NDR strucures namespace as specified. | The schema or instance MUST use content within the NIEM structures namespace as specified in this document and ONLY as specified by this document.
Manual Fail | 0 | NIEM-2.1_7-56_REF_SUB_EXT: ComplexType definition structures:sequenceID. | Within the schema, a complex type definition SHALL include the attribute structures:sequenceID if the order of an occurrence of the type, within its parent, relative to its siblings, is meaningful and pertinent and if the schema does not specify the desired sequential order.
Manual Fail | 0 | NIEM-2.1_7-57_REF_SUB_EXT: Reference elements. | Within the schema, a reference element and only a reference element SHALL be defined to be of type structures:ReferenceType.
Auto Pass | 0 | NIEM-2.1_7-58_REF_SUB_EXT: ComplexType must not own the attribute structures:ref. | Within the schema, a complex type SHALL NOT be defined such that an instance of that type owns the attribute structures:ref.
Manual Fail | 0 | NIEM-2.1_7-59_REF_SUB_EXT: NCName and NCNameReference Elements. | Within the schema, any two elements of the form NCName and NCNameReference where the string value of NCName is the same in both forms, SHALL be defined to have identical semantics. NIEM recognizes no difference in meaning between a reference element and an element that is not a reference element.
Manual Fail | 0 | NIEM-2.1_7-60_REF_EXT: appinfo:ReferenceTarget for NCNameReference. | Within the schema, if both elements NCName and NCNameReference exist, then the appinfo:ReferenceTarget of any NCNameReference element MUST be the type of the element NCName.
Auto Pass | 0 | NIEM-2.1_7-61_REF_EXT: appinfo:ConformantIndicator. | Within the schema, an element xsd:import that imports a namespace defined by an external schema MUST have the application information appinfo:ConformantIndicator, with a value of false.
Auto Pass | 0 | NIEM-2.1_7-62_REF_EXT: xsd:import for and external schema. | Within the schema, an element xsd:import that imports a namespace defined by an external schema MUST be a documented component.
Manual Fail | 0 | NIEM-2.1_7-63_REF_EXT: AdapterType application information. | Within the schema, an adapter type MUST have application information appinfo:ExternalAdapterTypeIndicator with a value of true. A type that is not an adapter type SHALL NOT contain that indicator.
Auto Pass | 0 | NIEM-2.1_7-64_REF_SUB_EXT: AdapterType must be an immediate extension of structures:ComplexObjectType. | Within the schema, an adapter type MUST be an immediate extension of type structures:ComplexObjectType.
Manual Fail | 0 | NIEM-2.1_7-65_REF_SUB_EXT: AdapterType composition. | Within the schema, an adapter type MUST be composed of only elements and attributes from an external standard.
Auto Pass | 0 | NIEM-2.1_7-66_REF_EXT: AdapterType element reference. | Within the schema, an element reference used in an adapter type definition MUST be a documented component.
Auto Pass | 0 | NIEM-2.1_7-67_REF_EXT: AdapterType attribute reference. | Within the schema, an attribute reference used in an adapter type definition MUST be a documented component.
Auto Pass | 0 | NIEM-2.1_7-68_REF_SUB_EXT: AdapterType must not be extended or restricted. | Within the schema, an adapter type MUST NOT be extended or restricted.
Manual Fail | 0 | NIEM-2.1_7-69_SUB: targetNamespace attribute value. | The value of the targetNamespace attribute owned by the xsd:schema document element of the subset schema must be the same as the value of the targetNamespace attribute owned by the xsd:schema document element of the reference schema.
Manual Fail | 0 | NIEM-2.1_7-70_SUB: Schema construction. | The schema must be constructed such that any instance that is XML Schema valid against the schema must also be XML Schema valid against the base schema.
Manual Fail | 0 | NIEM-2.1_8-01_INS: XML document must be schema-valid. | The XML document MUST be schema-valid, assessed with reference to the schema composed of the reference schemas, extension schemas, exchange schemas, utility schemas, and external schemas for the relevant namespaces.
Auto Pass | 0 | NIEM-2.1_8-02_INS: Elements with no content. | Within the instance, the meaning of an element with no content is that additional properties are not asserted. There SHALL NOT be additional meaning interpreted for an element with no content.
Auto Pass | 0 | NIEM-2.1_8-03_INS: Property assertion. | Within an element instance, there SHALL NOT be any difference in meaning between a property asserted via element containment and a property asserted by element reference, except as explicitly described by the semantics of the elements involved.
Manual Fail | 0 | NIEM-2.1_8-04_INS: ID attribute value | Given that the IDREF that is the value of an attribute structures:ref matches the value of an ID attribute on some element in the XML document, that ID attribute must be an occurrence of the attribute structures:id.
Manual Fail | 0 | NIEM-2.1_8-05_INS: attribute structures:ref reference. | Within an element instance, given that a reference element is restricted to a target type T, any attribute structures:ref MUST reference an element that has a type definition of type T or that is derived from type T.
Auto Pass | 0 | NIEM-2.1_8-06_INS: child element order. | The order of elements that are children of an element SHALL be presented as if their sequential order is as follows: 1. First, elements owning an attribute structures:sequenceID, in the order that would be yielded with their sequence IDs sorted via sort element as defined by [XSLT], with a data type of number and an order of ascending. 2. Following those elements, the remaining elements, in the order in which they occur within the XML instance.
Manual Fail | 0 | NIEM-2.1_8-07_REF_EXT_INS: structures:sequenceID interpretation. | Within a schema or instance, the attribute structures:sequenceID SHALL NOT be interpreted as meaningful beyond an indicator of sequential order of an object relative to its siblings.
Manual Fail | 0 | NIEM-2.1_8-08_INS: Object metadata. | Within an element instance, when an object O links to a metadata object via an attribute structures:metadata, the information in the metadata object SHALL be applied to the object O.
Manual Fail | 0 | NIEM-2.1_8-09_INS: Element relationship metadata. | Within an element instance, when an object O1 contains an element E, with content object O2 or with a reference to object O2, and O2 links to a metadata object via an attribute structures:linkMetadata, the information in the metadata object SHALL be applied to the relationship E between O1 and O2.
Manual Fail | 0 | NIEM-2.1_8-10_INS: ID attribute must be an occurrence of the attribute structures:id. | Given that each IDREF in the value of an attribute structures:metadata must match the value of an ID attribute on some element in the XML document, that ID attribute MUST be an occurrence of the attribute structures:id.
Manual Fail | 0 | NIEM-2.1_8-11_INS: Elements refrenced by structures:metadata must have a type definition that is derived from structures:MetadataType. | Each element that an attribute structures:metadata references MUST have a type definition that is derived from structures:MetadataType.
Manual Fail | 0 | NIEM-2.1_8-12_INS: ID attribute must be an occurrence of the attribute structures:id. | Given that each IDREF in the value of an attribute structures:linkMetadata must match the value of an ID attribute on some element in the XML document, that ID attribute MUST be an occurrence of the attribute structures:id.
Manual Fail | 0 | NIEM-2.1_8-13_INS: Attributes refrenced by structures:metadata must have a type definition that is derived from structures:MetadataType. | Each element that an attribute structures:linkMetadata references MUST have a type definition that is derived from structures:MetadataType.
Manual Fail | 0 | NIEM-2.1_8-14_INS: element information item and type definition relationship. | Given that an element information item E has a type definition of some type T, each metadata type that is the type definition of an element information item referenced by an attribute structures:metadata or structures:linkMetadata on element E MUST be applicable to T.
Auto Pass | 0 | NIEM-2.1_9-01_REF_SUB_EXT: complexType name and XML Schema namespace simpleType extension. | Within the schema, a complex type that is a direct extension of a simple type from the XML Schema namespace simple type MAY use the same local name as the simple type if and only if the extension adds no content other than the attribute group structures:SimpleObjectAttributeGroup.
Manual Fail | 0 | NIEM-2.1_9-02_REF_SUB_EXT: XML Schema component name must be English. | The name of any XML Schema component defined by the schema SHALL be composed of words from the English language, using the prevalent U.S. spelling, as provided by [OED].
Auto Pass | 0 | NIEM-2.1_9-03_REF_SUB_EXT: XML Schema component name | The name of any XML Schema component defined by the schema SHALL contain only the following characters: *Upper-case letters ('A'-'Z'). *Lower-case letters ('a'-'z'). *Digits ('0'-'9'). *Hyphen ('-'). Other characters, underscore ('_') character and the period ('.') character SHALL NOT appear in component names in NIEM-conformant schemas.
Manual Fail | 0 | NIEM-2.1_9-04_REF_SUB_EXT: Component name hyphen characters. | The hyphen character ('-') MAY appear in component names only when used as a separator between parts of a single word, phrase, or value, which would otherwise be incomprehensible without the use of a separator.
Auto Pass | 0 | NIEM-2.1_9-05_REF_SUB_EXT: attribute declaration names must being with a lower-case letter. | Within the schema, any attribute declaration SHALL have a name that begins with a lower-case letter ('a'-'z').
Auto Pass | 0 | NIEM-2.1_9-06_REF_SUB_EXT: XML Schema components other that an attribute declaration must beging with an upper-case letter. | Within the schema, any XML Schema component other than an attribute declaration SHALL have a name that begins with an upper-case letter ('A'-'Z').
Manual Fail | 0 | NIEM-2.1_9-07_REF_SUB_EXT: XML Schema component name shall use camel case. | The name of any XML Schema component defined by the schema SHALL use the camel case formatting convention.
Manual Fail | 0 | NIEM-2.1_9-08_REF_SUB_EXT: Schema MUST consistently use approved acronyms, abbreviations, and word truncations within defined names | The schema MUST consistently use approved acronyms, abbreviations, and word truncations within defined names. The approved shortened forms are defined in Table 9-1 Abbreviations Used in NIEM Names.
Manual Fail | 0 | NIEM-2.1_9-09_REF_SUB_EXT: Noun use in XML Schema component names. | A noun used as a term in the name of an XML Schema component MUST be in singular form unless the concept itself is plural.
Manual Fail | 0 | NIEM-2.1_9-10_REF_SUB_EXT: Verb use in XML Schema component names. | A verb used as a term in the name of an XML Schema component MUST be used in the present tense unless the concept itself is past tense.
Manual Fail | 0 | NIEM-2.1_9-11_REF_SUB_EXT: Articles, conjunctions, and prepositions must not be used in NDR component names. | Articles, conjunctions, and prepositions SHALL NOT be used in NIEM component names except where they are required for clarity or by standard convention.
Manual Fail | 0 | NIEM-2.1_9-12_REF_SUB_EXT: Element and Attribute name format. | Except as specified elsewhere in this document, any element or attribute defined within the schema SHALL have a name that takes the form: *Object-class qualifier terms (0 or more). *An object class term (1). *Property qualifier terms (0 or more). *A property term (1). *Representation qualifier terms (0 or more). *A representation term (1).
Manual Fail | 0 | NIEM-2.1_9-13_REF_SUB_EXT: Object-class term of a NIEM component. | The object-class term of a NIEM component SHALL consist of a term identifying a category of concrete concepts or entities.
Manual Fail | 0 | NIEM-2.1_9-14_REF_SUB_EXT: Property terms. | A property term SHALL describe or represent a characteristic or subpart of an entity or concept.
Auto Pass | 0 | NIEM-2.1_9-15_REF_SUB_EXT: Multiple qualifier terms with a component name. | Multiple qualifier terms MAY be used within a component name as necessary to ensure clarity and uniqueness within its namespace and usage context.
Manual Fail | 0 | NIEM-2.1_9-16_REF_SUB_EXT: Number of qualifier terms should be limited. | The number of qualifier terms SHOULD be limited to the absolute minimum required to make the component name unique and understandable.
Manual Fail | 0 | NIEM-2.1_9-17_REF_SUB_EXT: Qualifier order. | The order of qualifiers SHALL NOT be used to differentiate names.
Manual Fail | 0 | NIEM-2.1_9-18_REF_EXT: Representation term and Property term redundancy. | If any word in the representation term is redundant with any word in the property term, one occurrence SHOULD be deleted.
Auto Pass | 0 | NIEM-2.1_9-19_REF_SUB_EXT: Simple Content element declaration name. | Within the schema, the name of an element declaration that is of simple content MUST use a representation term found in Table 9-2: Representation Terms.
Manual Fail | 0 | NIEM-2.1_9-20_REF_SUB_EXT: Complex Content element declaration names in Table 9-2. | Within the schema, the name of an element declaration that is of complex content, and that corresponds to a concept listed in Table 9-2: Representation Terms, MUST use a representation term from that table.
Manual Fail | 0 | NIEM-2.1_9-21_REF_SUB_EXT: Complex Content element declaration names in Table 9-2. | Within the schema, the name of an element declaration that is of complex content and that does not correspond to a concept listed in Table 9-2: Representation Terms MUST NOT use a representation term.
Manual Fail | 0 | NIEM-2.1_9-22_REF_SUB_EXT: Complex Content element declaration names not in Table 9-2 | Within the schema, the name of an attribute declaration MUST use a representation term from Table 9-2: Representation Terms.
Auto Pass | 0 | NIEM-2.1_9-23_REF_SUB_EXT: Type definition must use the representation term Type. | Within the schema, the name of any type definition MUST use the representation term Type.
Auto Pass | 0 | NIEM-2.1_9-24_REF_SUB_EXT: simpleType name must use the qualifier Simple. | Within the schema, the name of any simple type definition SHALL use the representation term qualifier Simple. This qualifier SHALL appear after any other representation term qualifiers.
Auto Pass | 0 | NIEM-2.1_9-25_REF_SUB_EXT: Any code type shall use the representation term qualifier Code. | Within the schema, the name of any code type SHALL use the representation term qualifier Code.
Auto Pass | 0 | NIEM-2.1_9-26_REF_SUB_EXT: Types with base type definitions or tranitively based on a code types must use the term qualifier Code. | Within the schema, any type definition which has a base type definition of a code type or which is transitively based on a code type SHALL have a name that uses the representation term qualifier Code.
Manual Fail | 0 | NIEM-2.1_9-27_REF_SUB_EXT: Association types shall have a name that uses the representation term qualifier Association. | Within the schema, any association type SHALL have a name that uses the representation term qualifier Association. Types other than association types SHALL NOT use the representation term qualifier Association.
Auto Pass | 0 | NIEM-2.1_9-28_REF_SUB_EXT: AugmentationType must use the qualifier Augmentation. | Within the schema, any augmentation type SHALL have a name that uses the representation term qualifier Augmentation. Types other than augmentation types SHALL NOT use the representation term qualifier Augmentation.
Auto Pass | 0 | NIEM-2.1_9-29_REF_SUB_EXT: Metadata types must use the qualifier Metadata. | Within the schema, any metadata type SHALL have a name that uses the representation term qualifier Metadata. Types other than metadata types SHALL NOT use the representation term qualifier Metadata.
Auto Pass | 0 | NIEM-2.1_9-30_REF_SUB_EXT: Attribute group definitions must use the qualifier AttributeGroup. | Within the schema, the name of any attribute group definition schema component SHALL use the representation term AttributeGroup.
Auto Pass | 0 | NIEM-2.1_9-31_REF_SUB_EXT: Reference element must use suffix Reference. | Within the schema, the name of any reference element SHALL use the representation term suffix Reference.
Auto Pass | 0 | NIEM-2.1_9-32_REF_SUB_EXT: Association elements must use the qualifier Association. | Within the schema, the name of an association element SHALL use the representation term qualifier Association.
Auto Pass | 0 | NIEM-2.1_9-33_REF_SUB_EXT: Augmentation elements must use the qualifier Augmentation. | Within the schema, the name of an augmentation element SHALL use the representation term Augmentation.
Auto Pass | 0 | NIEM-2.1_9-34_REF_SUB_EXT: Metadata elements must use the term Metadata. | Within the schema, the name of a metadata element SHALL use the representation term Metadata.
Auto Pass | 0 | NIEM-2.1_9-35_REF_SUB_EXT: Roles must use the property term RoleOf. | Within the schema, the name of a role SHALL use the property term RoleOf.